Precautions For Installation And Inspection Of Shower Hose

Precautions for installation of shower
1. The size of the selected hose must match;
2. The end of the hose must be trimmed to its original shape during installation;
3. When installing the hose at the joint, some grease can be applied to facilitate the installation of the pipe. If it is not possible to install it, the pipe can be heated with hot water before installation;
4. To avoid hose breakage, allow some leeway to flow when tightening.

Shower needs regular inspection
1. During the use of the hose, it should be regularly checked for looseness and water leakage.
2. The service life of the hose is limited, and temperature, flow rate, pressure, etc. can affect its use. If abnormal, it should be replaced promptly.

Pressure requirements for shower
1. Use within the indicated temperature range;
2. The inside of the hose may expand and contract due to factors such as temperature and pressure, and the tubes used should meet the length requirements;
3. When applying pressure, the valve should be slowly opened to avoid damage to the hose caused by the pear;
4. Select the appropriate hose according to the purpose.