Connection Methods Of Various Metal Shower Hoses

In shower rooms, many families choose to choose metal shower hoses first. Compared to PVC shower hoses, metal hoses are safer to use, resistant to high temperatures, and have better pressure resistance. When using it, it is necessary to properly connect the two ends. Below are some of their connection methods.
Threaded Type
Generally, soft dirt with a diameter of less than 50mm is connected in a threaded manner. By tightening the ribs, it is possible to achieve a tight connection between the inside and outside of the joint and achieve a sealing effect for the metal shower hose. However, when connecting, it is necessary to ensure that the concentricity of the two butt joints is consistent.

Flange Type
This type of product is mainly used for metal shower hose with a diameter of more than 25mm. Through a looper flange plate that rotates radially or slides axially, two butt pieces are connected together, but this excuse is relatively difficult to process.

Fast
This type of joint is mainly used in metal shower hoses with a diameter of less than 100mm. It has fluoroplastic or O-ring inside. After moving the joint handle to a certain angle, it can be tightly sealed. This type of joint is characterized by fast installation.
The above are common connection methods for metal shower hoses. In order to enjoy the shower process with peace of mind, it is necessary to connect the shower hoses correctly and ensure that they are tightened.