How To Replace The Large Caliber Shower Hose At Home?

Shower hose is one of the common accessories used in bathroom at home. You can enjoy the shower by connecting the nozzle to the water outlet of the water heater. However, the service life of the large-diameter shower hose is limited. If the hose has aging, rust, and other problems, it needs to be replaced in a timely manner. The following editor will introduce specific replacement methods.
1. To prevent accidents, it is best to turn off the power supply before replacing the shower hose.
2. Close the water outlet valve to prevent splashing during replacement.
3. Unscrew the turnbuckles on both ends of the large diameter shower nozzle hose. This step can be assisted by selecting tools such as wrenches.
4. Remove the old shower pipe, connect the new shower pipe to the joint between the water heater and the shower, and then tighten the joint. Generally, the joint of the shower pipe will have a rubber ring, and pay attention to whether the rubber ring is damaged during installation.
5. Open the water outlet valve to see if there is any leakage.
6. If there is no water leakage, you can connect the power supply, and the shower pipe has just been replaced.