Shower head how to remove, shower hose common problems to solve

How to disassemble the shower head

1. Remove shower head

There are many different types of showers, and the design of the manufacturer is different, resulting in different ways of disassembly of the shower head. For most showers, the shower head is an active design, only need to turn the rotating button of the shower can be directly unscrewed; Some of the shower head design is relatively complex, need some tools to disassemble the head; Some shower heads are designed to make it impossible to remove the head at all.

2. Wash shower head

Because the tap water contains a trace amount of sediment, in the long-term use of the shower, the sediment accumulates over time, it will gradually block the water outlet hole of the shower head, and even the sand will accumulate inside the shower. To clean the sand, the method is as follows:

①.Cleaning shower head: Use a needle to open the blocked active water outlet hole;

②.Cleaning the inside of the shower: remove the pipe head connected with the shower, rinse the shower with the water in the reverse direction of the tap, and then fill the inside of it with water, block the water inlet, shake it vigorously, and quickly release the dirty water, so repeated several times, this way is suitable for cleaning all the shower; If the shower head can be disassembled, it is very simple to clean the interior, just open the shower head and rinse it with tap water.

Shower hose common problem solving

Shower hose is the most easily damaged part of the whole water heater spare parts, and the most common problem with shower hose is leakage. Experts pointed out that water quality, water temperature, moisture, material and so on are the main reasons for the leakage of shower hose, all kinds of impurities in the water will cause corrosion to the shower hose inside, and the water temperature is too high on the shower will also have some damage. It can be seen that the leakage of shower hose is a normal phenomenon and inevitable.

Shower hose material has pvc material, rubber, and hose sleeve wire, the front two materials of shower hose leakage, you can use adhesive leakage, and hose sleeve wire shower hose if the water leakage, the best way to solve the only way is very simple: replace the new shower hose. The replacement of shower hose is also very simple, close the water heater faucet, twist off the hose at both ends, in the replacement screw on the new shower hose can be, under normal circumstances, directly by hand can be unscrewed, without the use of tools such as wrenches.