Installation method of shower

The installation height of the shower can be divided into two types according to the type of shower:
The surface mounted lifting rod sprinkler is generally defined as the sprinkler rising from the water surface, and its distance is preferably 2 meters.
It should be noted that these data are only average data, and should be adjusted based on the height of the user when actually installing the shower.
The concealed water pipes of the exposed shower switch should be hot on the left and cold on the right, with a center spacing of 150mm. The concealed water outlets on the wall should be flush with the tile surface, and the internal concealed water pipes should be perpendicular to the wall. After the installation of the shower, they should form a 90 degree angle with the wall.
In addition, the water pressure adjustment of a sprinkler is also a key: Generally, a water pressure of less than 1.5 kilograms is most suitable for sprinkler use. Excessive water pressure can cause the sprinkler to burst, and a sprinkler with too small water pressure cannot be used properly.