SS Shower Hose
You are here: Home » Products » SS Shower Hose

SS Shower Hose

SS Shower Hose

Braided Hose


As a stainless steel shower hose manufacturer, Yowin has developed a complete range of shower hoses. Our stainless steel flexible shower hoses are designed to transfer hot and cold water for shower heads after valves and fittings.

 

Stainless Steel Replacement Shower Hose is durably made with stainless steel in a sleek chrome finish. Stylish with a modern look, this hose complements many decor styles and will provide strong water pressure for an enjoyable shower experience every time.

 

For all specific configurations and requests, do not hesitate to contact us.
 

Item Name Material
1 Outer house Stainless steel / Brass
2 Inner hose PVC / EPDM / Rubber
3 Structure Double-lock / Single-lock
4 Nut Brass / Zinc / Plastic / Stainless steel
5 Washer NBR / Rubber / PVC / Silica gel
6 Insert Brass / Plastic / Nylon
7 Connector Plastic / Nylon
8 Sleeve Stainless steel / Brass
 

Fittings

F

1/2 (Nut X
1/2 (Cone nut
 

Stainless steel shower hose length

Most shower heads with hose-sets come with the standard 60-inch hose. While 5 feet may seem like a good amount, it’s honestly not ideal.

 

Why? A most standard tub and shower set-ups are about 5 feet long. But, you lose at least 6 inches of actual reach when you consider the bending that the hose has to make to reach the back wall of the shower. And that’s just for standard showers.

SS Shower Hose Series

SS Shower Hose Specification Chart

HOSE PART NO. HOSE  SIZE I.D.  (IN.) O.D.  (IN.) HOSE LENGTH (cm) TEMPERATURE  (℃) Working Pressure   bar 20°C (kgf/cm2) Test Pressure
bar 20°C (kgf/cm2)
Minumum bend radius  (mm) WEIGHT  (gr/m) MOQ  (PCs) Material Grade  (SUS)
YN7601 1/2" 0.4 0.57 30-200 -20 to 110 250 350 150 275 2000 304
YN7602 1/2" 0.4 0.57 30-200 -20 to 110 250 350 150 275 2000 304
YN7603 1/2" 0.4 0.57 30-200 -20 to 110 250 350 150 275 2000 304
YN7604 1/2" 0.4 0.57 30-200 -20 to 110 250 350 150 275 2000 304
YN7605 1/2" 0.4 0.57 30-200 -20 to 110 250 350 150 275 2000 304
YN7606 1/2" 0.4 0.57 30-200 -20 to 110 250 350 150 275 2000 304
YN7607 1/2" 0.4 0.57 30-200 -20 to 110 250 350 150 275 2000 304
YN7608 1/2" 0.4 0.57 30-200 -20 to 110 250 350 150 275 2000 304
YN7609 1/2" 0.4 0.57 30-200 -20 to 110 250 350 150 275 2000 304
YN7610 1/2" 0.4 0.57 30-200 -20 to 110 250 350 150 275 2000 304
YN7611 1/2" 0.4 0.57 30-200 -20 to 110 250 350 150 275 2000 304
 

Shower hose Material

The most common hose materials on the market are PVC, rubber, steel wire, which has good bending resistance, is not easy to break, and has a longer service life.

 

The shower hose is the link that connects the hand shower to the tap. It is composed of an EPDM inner tube, high-temperature nylon core, and 304 stainless steel outer tubes. The nuts are made of copper, and the gasket is made of NBR. Tri-ethyl propylene rubber is a copolymer, ethylene, propylene, and non-conjugated diolefins that are polymerized with a solution of rubber. Why use this rubber for a hose?

 

First of all, this rubber is very good for aging and hot water, and the sanitary hose can be used for long periods of hot water, so using EPDM as a hose is the best material.

 

Followed by elastic, in the use of hand-held shower need to constantly stretch to flush the body, and EPDM molecular chain can maintain flexibility in a wider range, can remain under low, so this is also the designers to choose one of the leading causes of EPDM.

How to install a shower with hose

Step 1: Remove old shower head & clean shower arm

Depending on how long your old shower head has been installed, you may be able to remove it by hand. If not, you can use an adjustable wrench to unthread the shower head-turning, it in a clockwise counterclockwise motion.

 

Step 2: Apply new Teflon tape to the shower arm 

Now that you've cleaned your shower arm, it's time to apply new Teflon tape, ensuring a leak-free seal when installing your shower head.

Starting at the bottom of the pipe, work your way up the threads, giving it about 4 to 5 turns. Finally, smooth out the Teflon tape onto the shower arm threads using your fingers.

 

Step 3: Install the hand held shower head with hose
1. Install the shower holder

Start by tightening the shower head holder by hand, going in a clockwise motion. You can now tighten it down, even more, using a pair of soft grip pliers or an adjustable wrench.

2.Install the shower head hose

Start by placing one washer inside of the hex nut and hand tightening the hose onto the bottom of the shower holder threads.

3. Dock your hand held shower head

With your holder, hose and showerhead installed, dock your hand shower into your shower holder. 

 

Step 4: test for leaks

Let's run some water through the hand held shower head and test it out. There are three areas you want to check to see if there are any leaks:

  • Where the shower holder connects to the shower arm.
  • Where the shower hose connects to the shower holder.
  • Where the shower hose connects to the handshower.

PRODUCT INQUIRY
High quality, Competitive Price.
Custom-tailored solutions.
Problem-solving approach.
If you would like to have a chat then get in touch today, we are ready to assist 24/7.

Navigation

Contact Us

 Tel: +86-574-27729177
 Email:sales@yowinpipe.com
 Fax:+86-574-27729100
 Cell:+86-18667830020
 Add: RM804,NO.33 Lane 207 Huancheng Road(W)Ningbo, China.
Copyright © 2019 Ningbo Yowin Pipe Industry Co.,Ltd. All Rights Reserved. XML |Sitemap