SS Flexible Corrugated Hose
You are here: Home » Products » SS Flexible Corrugated Hose
SS Flexible Corrugated Hose

SS Flexible Corrugated Hose

The Brief Introduction of Stainless Steel Braided Flex Hose

Yowin is a leading manufacturer of ss corrugated hose and braid products. Yowin Corporation has been a pioneer from the very beginning and continues today to be a leader in the design, and manufacturer of flexible metal hose. Yowin hoses, known for their durability and superior resistance to corrosion, are used in more than 15 vertical markets, by hundreds of companies worldwide.

Item Name Material
1 Nut Brass
2 Flat washer EPDM
3 Sleeve POM
4 Stainless Steel Corrugated Connector Stainless Steel
L 12”15”18”24”30”36”
 

Nuts of SS Corrugated Hose

The nuts are made of refined brass and forged in high temperature. They are strong and durable enough to butted with 4-minute nuts.

F

1/2(Normal / Elbow)
3/4 (Brass / Plastic)
3/8 (Normal / Elbow)

M

1/2(Normal / Elbow)
3/4 (Brass / Plastic)
3/8 (Normal / Elbow)

M10

(Normal / Short / Long)
 

Characteristic of SS Corrugated Hose

  • Approved for electric and gas water heaters with flue vent
  • Stainless steel corrugated hose can be used as an alternative to hard piping
  • Compatible with PEX, copper, CPVC and PE-RT pipe
  • No special tools, crimping, glue or soldering is needed
  • Can be installed in wet lines
  • Can be rotated for easier and faster installation
  • Ideal for working in tight spaces
  • Remove using a Disconnect Clip or Disconnect Tongs

Stainless Steel Braided Flex Hose Series

SS Flexible Corrugated Hose Specification Chart
HOSE PART NO. HOSE  SIZE
  1. I.D.  (IN.)
O.D.  (IN.) HOSE LENGTH (cm) TEMPERATURE  (℃) Working Pressure   bar 20°C (kgf/cm2) Test Pressure
bar 20°C (kgf/cm2)
Minumum bend radius  (mm) WEIGHT  (gr/m) MOQ  (PCs) Material Grade  (SUS)
YN8601 3/4" 0.6 0.8 30-200 -20 to 110 350 500 150 385 2000 304
YN8602 3/4" 0.6 0.8 30-200 -20 to 110 350 500 150 385 2000 304
YN8603 3/4" 0.6 0.8 30-200 -20 to 110 350 500 150 385 2000 304
YN8604 3/4" 0.6 0.8 30-200 -20 to 110 350 500 150 385 2000 304
YN8605 3/4" 0.6 0.8 30-200 -20 to 110 350 500 150 385 2000 304
YN8606 3/4" 0.6 0.8 30-200 -20 to 110 350 500 150 385 2000 304
YN8607 3/4" 0.6 0.8 30-200 -20 to 110 350 500 150 385 2000 304
YN8608 3/4" 0.6 0.8 30-200 -20 to 110 350 500 150 385 2000 304
YN8609 3/4" 0.6 0.8 30-200 -20 to 110 350 500 150 385 2000 304
YN8610 1/2" 0.4 0.6 30-200 -20 to 110 300 500 150 325 2000 304
YN8611 1/2" 0.4 0.6 30-200 -20 to 110 300 500 150 325 2000 304
YN8612 1/2" 0.4 0.6 30-200 -20 to 110 300 500 150 325 2000 304
YN8613 1/2" 0.4 0.6 30-200 -20 to 110 300 500 150 325 2000 304
 
Advantages of Copper Corrugated Hose

Advantages of Stainless Steel Braided Flex Hose

● Temperature

Contingent upon the extremes of temperature, corrugated metal hose is a positive choice as it can withstand temperature extremes.

● Easy Installation

Corrugated flexible hose can be installed in record time. The ease of installation means that you realize savings in terms of labor costs.

● Fitting Configuration

The corrugated metal hose can be attached to any type of fittings without any special requirement of shanks and collars as other hose types need.

● Temperature

Contingent upon the extremes of temperature, corrugated metal hose is a positive choice as it can withstand temperature extremes.

● Light Weight

Copper corrugated hoses are light in weight, thus, they offer you the added benefit of ease of storage and transportation. Basically, light materials can be transported faster and cheaply.

● Good flexibility

Corrugated hoses have the features of suppleness, high strength and good elasticity. It is an inexpensive household hose

Application of SS Corrugated Hose

Toilet
Washbasin
Mop Pool
Water Heater
Bathtub
Kitchen
Faucet

Testing and Certifications

Every single ss corrugated flexible hose assembly is tested for leak integrity. We can offer a variety of types of testing, with corresponding certifications provided. These tests and certifications include:

● Pressure testing

Hose assemblies are pressurized pneumatically or hydrostatically to ensure that the hose assemblies do not leak prior to shipping from the factory. The hoses are tested per CGA and NAHAD standards depending on the application. Yowin has the ability to cycle test hose assemblies up to 50,000 psi.

● Destructive testing

Hose assemblies are pressurized to burst pressures to ensure that the hose meets the published levels.

● Mass Spectrometer

Yowin has the ability to test hose assemblies using a mass spectrometer to indicate possible leaks when the hoses are to be used for transferring small molecule, high permeation gases.

 

● Material Test Reports

Yowin can provide the material test reports for the materials used in the hose manufacturing process upon request.

PRODUCT INQUIRY
High quality, Competitive Price.
Custom-tailored solutions.
Problem-solving approach.
If you would like to have a chat then get in touch today, we are ready to assist 24/7.

Navigation

Contact Us

 Tel: +86-574-27729177
 Email:sales@yowinpipe.com
 Fax:+86-574-27729100
 Cell:+86-18667830020
 Add: RM804,NO.33 Lane 207 Huancheng Road(W)Ningbo, China.
Copyright © 2019 Ningbo Yowin Pipe Industry Co.,Ltd. All Rights Reserved. XML |Sitemap